Shopping Cart
Your Cart is Empty
There was an error with PayPalClick here to try again
CelebrateThank you for your business!You should be receiving an order confirmation from Paypal shortly.Exit Shopping Cart


inspiration for your creativity

Pastimes currently offers CURBSIDE PICK-UP or by Appointment only at our location in Italy Cross, Nova Scotia.

email: [email protected] text: 902-514-2444

FUSION Product Line up


500 ml  ($24.99)

37 ml ($5.99)

Easy to apply with a smooth matte finish, Fusion™ requires minimal prep work, no finishing coat, waxing or on-going maintenance!

Fusion™ is not your average paint that you buy at the hardware store. Each and every ingredient in our formulation is carefully selected, evaluated and tested to the strictest quality control measures to ensure a superior performing paint.

Each batch goes through rigorous quality control ensuring that the paint will not separate or harden in the container for 7 years. We are able to achieve this by using only the best available ingredients on the market. Our formulation is 100% uniquely ours, formulated from the ground up.

FUSION Metallics

250 ml ($24.99)

37 ml ($11.99)

This metallic paint is self-leveling and comes in 250ml containers. Some colours are available in 37 ml size.

Milk Paint by Fusion

50g tester/small project size ($7.99)

330g large - 1 makes approx. 1 quart at 1:1 ratio ($28.99)


Just add this fabulous new powder to any Fusion Paint to achieve the perfect sea swept, weathered, worn and rustic texturized look.

Fresco is 100% natural and contains no VOC's

Our small Package will make 1 Pint of the Sea Swept or Crackled Heavy Texture look, or 5 Pints of Flat Matte Chalky Finish. Enough to paint the huge 7 foot wardrobe

Depending on your mix and application, you will get a different end result

See package instructions to achieve three different looks

Crackled Heavy Texture

Flat Mat Chalky Finish

Sea Swept


250 ml

Add any colour Fusion paint to our Clear Glaze to create your own unique glaze tone. My favourite is adding Chocolate for a rich brown glaze or Ash for a greyish tone but you can use any of our Fusion Paint Colours. Our antiquing glaze is lightly pre-tinted to a rich brown for the perfect antiquing look and soft matte finish.

With an exceptional ease of application with a long open time, our Glaze delivers the performance of a professional finish that everyone can achieve!

  • Over light colors, use sparingly so as not to over age your piece.
  • Always do a sample to ensure desired results prior to full application.

Ultra Grip

500 ml

Have a really tricky surface to paint? Our Ultra Grip™ allows for Fusion™ to adhere to surfaces that are typically not for painting such as a lacquered surface, laminate, metal or glass.

This water based emulsion increases the adhesion of Fusion™ colours to glossy, hard to grip surfaces. Milky when wet, dries translucent with very good clarity. Test your methods and product combinations prior to applying in order to ensure desired effects.

For optimum adhesion, clean the surface to be painted and sand lightly to roughen the surface. To use: Apply one coat. Allow to dry for 12 hours before applying subsequent coats of Fusion™ colours. Clean up with water.

Tough Coat, Matte finish and NOW AVAILABLE IN GLOSS

500 ml

Perfect for those high traffic surfaces such as table tops, our non-yellowing water-based wipe on sealer, easily applied with a damp lint free cloth and dries to a matte finish.

Shake gently before use. If applying to a recently painted surface, allow 12-24 hours of drying time before applying. For best results, use with a damp lint free rag and apply two coats 2-4 hours apart. In humid areas, longer drying times may be required.

Good to know: 500ml covers about 75 sq.ft (7m2). Always test your methods and process to ensure best results. Clean up is easy with soap and warm water.

Tip: Be sure to gently mix your Tough Coat™ prior to using it as the matting agent and

other ingredients may settle to the bottom. Do not shake vigorously as this

will cause air bubbles in your piece that are difficult to remove once applied.

Brush Soap

150 ml

Made from naturally refined linseed oil, a derivative of flax seed, Fusion™ Linseed Soap safely cleans and conditions all of your artist brushes. Use for all types of brush hair, from sable to synthetic. Great for cleaning hands, floors and work surfaces!

For a greener studio and well-cared for artist tools.

100% natural, non-toxic and virtually odorless!

Directions: lather hands or working tools with soap and rinse with water.

Beeswax Distressing Block


Using a wax resist allows for easy distressing! For exact placement of distressed lines and edges press the wax along the edges where you would like to see the distressed antiquing effect between layers of paint. Anything that is applied on top of the waxed areas will easily distress without too much sanding! You will notice this resist once you are giving your piece a light sanding at the end of your application of all layers of paint. The paint underneath the wax will remain in place, and any paint applied on top of the wax will come off effortlessly, allowing for the perfect distressed look. This is a pure, 100% natural beeswax block.

Smooth Embossing Paste Pearl

500 ml

Fusion™ Smooth Embossing Paste Pearl is an acrylic based medium that has a thick consistency. It is ideal to use for embossing through stencil patterns to create a raised effect. It will dry translucent with a pearl finish and can then be painted, glazed or waxed over to enhance your design.

Can be tinted with any of our metallic and regular colour paints to create beautiful effects. This product can be applied by using a damp sponge, spatulas, brushed, or used with stencils. These are great for embellishing raised areas and creating a more contemporary look.

Decoupage & Transfer Medium

250 ml

500 ml

Clear, quick drying with a matte finish, ideal for transferring printed images on to wood, paper or other non-oily or greasy, porous surfaces. For interior applications. Water resistant.

Transfer images using a laser prints. Apply transfer gel to the surface.

Place printed image face down into the wet gel, press out air bubbles and allow to dry.

When completely dry (6-12 hrs.), dampen the paper with a wet sponge allowing the water to penetrate the paper pulp.

Carefully rub with a soft cloth or nylon scouring pad (for a weathered look) to remove the paper but leave the image intact. Continue to finish as desired with paints, glazes, washed, metallic tints, you name it!

Did you know? FUSION Decoupage & Image Transfer Medium can also be used as a decoupage medium.